E-flite 40-Amp Lite Pro Switch-Mode BEC Brushless ESC

Omadused:
Up to 40-amp continuous current with proper airflow, 55-amp burst current
5-volt Switch-Mode BEC circuit capable of 2.5-amp continuous current
Drives up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
3S-6S LiPo or 9- to 18-cell Ni-MH/Ni-Cd input voltage
Programmable motor braking
Safe power-arm mode prevents accidental starts
Programmable soft start for helis and airplanes
Auto motor shutdown if signal is lost or there is interference
Programmable timing – 5 user-selectable ranges for use with a larger variety of brushless motors
Programmable throttle input range (1.1–1.9ms or 1.2–1.8ms)
Heli mode for starting the motor with a low speed ratio
Optional RS232 Serial Link available for programming (EFLARS232)
Pre-wired connectors-E-flite EC3 connectors on battery input and 3.5mm female gold bullets on motor output leads

Tehnilised andmed:
Brake: Yes
Continuous Maximum Current: 40A
Input Voltage: 3S-6S LiPo or 9- to 18-cell Ni-MH/Ni-Cd
Input Connector Types: 13AWG with E-flite EC3 connector
Output Connector Types: 16AWG with 3.5mm Female Gold Bullet Connectors
Momentary Peak Current: 55A
Length: 66mm
Width: 31mm
Height: 12mm
Weight: 48g
BEC Voltage: 2.5A continuous